ONE SHOT WONDER
STEP BY STEP
GUIDE
ONE SHOT WONDER - STEP 1
Before applying our liquid product its always worth checking the weather, it is important this product is applied on a dry day, this allows the product to dry onto the grass and allow the fertiliser to be absorbed. Once absorbed into the grass this will allow the product to work straight away and give you a green up within 24hrs. It is always recommended to mow the lawn prior to application. We recommend wearing waterproof protective gloves when applying this product
ONE SHOT WONDER - STEP 2
Using our liquid one shot applicator is simple and easy, ensure your hose pipe is long enough to reach all areas of the lawn prior to beginning application. Unscrew the lid on the pouch and attach our liquid applicator, make sure it’s on tight to avoid any leakages. On the side you’ll see a dial, this opens and closes the one shot applicator, ensure this is in the closed position. This product can also be used using a knapsack sprayer and dilution rates are on the back of the pouch
ONE SHOT WONDER - STEP 3
So now we have the applicator attached to the pouch, the next step is to attach a hose pipe to the one shot applicator and turn on the water of the hose pipe, remember ensure the one shot applicator is in the closed position prior to turning the water on. Now the water is on, simply walk onto the lawn, we would suggest starting at the furthest point of the lawn and working back. Once ready turn the dial to open, this moves the dial anti-clockwise and will begin to allow the water and fertiliser to be sprayed onto the lawn. It is important to evenly spray this onto the lawn, think of it as blank canvas your trying to fully colour. Avoid applying too much water and flooding the lawn and avoid spraying hard surfaces to prevent any staining
ONE SHOT WONDER - STEP 4
Depending on size of lawn once the pouch is empty shut off the one shot applicator, if you have a smaller lawn than 100m2 you may find you have some product left in the pouch, this can be left in the pouch and used again on another application. If you have a bigger lawn then simply attach another pouch and continue with the application. Avoid going back onto the lawn after application until it has fully dried onto the grass. Once fully complete unattached the hose and ensure the applicator is in the close position again.
